To wrap the Wismec RBA, you will need to first prepare your coil wire by cutting a length of wire and straightening it out. Then, use a coil jig or screwdriver to wrap the wire around to create the desired number of wraps. Once wrapped, trim any excess wire and insert the coil into the RBA deck, making sure it is positioned correctly. Finally, tighten the screws to secure the coil in place and trim the leads. After that, you can install the RBA into your Wismec device and wick the coil to complete the process. **

One common problem with the Wismec RX300 is its battery door design. Many users have reported issues with the battery door not staying securely closed, leading to potential battery disconnection and device malfunction. Additionally, some users have experienced problems with the device not turning on or firing consistently, which could be attributed to internal circuitry issues. It is important to handle the device carefully and be aware of these potential issues to ensure a safe vaping experience. **

Yes, the Wismec Reuleaux RX 23 can be recommended for those looking for a compact and powerful vape mod. It offers a maximum output of 200W and supports various vaping modes, making it versatile for different preferences. Additionally, its ergonomic design and user-friendly interface make it a popular choice among vapers. **

The error message "no atomizer found" in Wismec devices typically indicates that the device is not detecting the atomizer or coil that is attached to it. This could be due to a loose connection between the atomizer and the device, a faulty coil, or a problem with the device itself. To resolve this issue, you can try reattaching the atomizer, checking the coil for any damage, or cleaning the connection points on both the atomizer and the device. If the problem persists, it may be necessary to seek professional assistance or consider replacing the atomizer or coil. **

To remove the logo you just changed on your Wismec device so that it doesn't display after 2 seconds, you can follow these steps: 1. Turn on your Wismec device and navigate to the logo display settings. 2. Select the option to change or remove the logo. 3. Choose the option to remove the logo completely from the display. 4. Save the changes and exit the settings menu. Now, the logo should no longer appear after 2 seconds on your Wismec device. **

There could be several reasons why the Wismec Gen3 is not turning on anymore. It could be due to a drained battery that needs to be recharged or replaced. Another possibility is that there may be a connection issue between the battery and the device, which can be resolved by checking and cleaning the battery contacts. Additionally, there could be a malfunction in the device itself, such as a faulty circuit or internal component, which may require professional repair or replacement. **

There could be several reasons why the Wismec RX Gen 3 is not charging. It could be due to a faulty charging cable or adapter, a problem with the charging port on the device, or a malfunction in the battery itself. It is also possible that the device is not making proper contact with the charging cable. It is recommended to try using a different charging cable and adapter, cleaning the charging port, and ensuring that the device is properly connected to the charger. If the issue persists, it may be necessary to contact customer support for further assistance. **

To remove the logo on your Wismec device so that it no longer displays after 2 seconds, you can follow these steps: 1. Turn on your Wismec device and navigate to the logo display settings. 2. Select the option to change or remove the logo. 3. Choose the option to delete the logo or select a different logo to display instead. 4. Save the changes and exit the settings menu. The logo should no longer display after 2 seconds on your Wismec device. **