To craft with concrete, you will need to gather the necessary materials such as concrete mix, water, a mold or form, and any desired additives like colorants or decorative elements. Start by mixing the concrete according to the instructions on the packaging, making sure it has a smooth and workable consistency. Pour the concrete into the mold or form, making sure to eliminate any air bubbles and smooth out the surface. Allow the concrete to cure and set according to the recommended time frame before removing it from the mold and finishing it as desired. **

To make a DIY concrete manual pad, you will need to first build a wooden frame in the shape and size of the manual pad you want. Then, mix concrete according to the instructions on the bag and pour it into the frame. Use a trowel to smooth the surface of the concrete and let it cure for at least 24 hours. Once the concrete is fully cured, remove the wooden frame and you will have a DIY concrete manual pad ready for skating. **

To apply concrete on concrete, the existing surface must be clean, free of debris, and properly moistened. A bonding agent or primer should be applied to the existing concrete to ensure adhesion. The fresh concrete mix can then be poured or pumped onto the existing surface and spread evenly using a screed or trowel. It is important to properly cure the new concrete to prevent cracking and ensure a strong bond between the two layers. **

Yes, it is possible to pour new concrete over old concrete as long as the existing concrete is in good condition and properly prepared. The old concrete should be clean, free of any loose debris, and roughened to provide a good bonding surface for the new concrete. Additionally, a bonding agent may be used to ensure a strong bond between the old and new concrete. It is important to consult with a professional to assess the condition of the existing concrete and determine the best approach for pouring new concrete over it. **

To pour a small concrete slab, you will need to prepare the area by clearing it of any debris and leveling the ground. Then, create a form using wooden boards to contain the concrete. Next, mix the concrete according to the instructions on the bag and pour it into the form. Use a screed board to level the concrete and a trowel to smooth the surface. Finally, allow the concrete to cure for the recommended time before removing the form. **

For setting lawn edging stones, garden concrete would be the better option. Garden concrete is specifically designed for outdoor use and is more durable and weather-resistant than concrete screed. It also has better adhesion properties, making it more suitable for securing the edging stones in place. Additionally, garden concrete is often formulated to be more resistant to cracking and shifting, which is important for maintaining the integrity of the lawn edging. **

To drill into a small concrete figurine, you will need a power drill with a masonry bit specifically designed for drilling into concrete. First, mark the spot where you want to drill and secure the figurine in place. Then, use the power drill to slowly and steadily drill into the concrete, applying gentle pressure. It's important to use a slow speed and periodically stop to clear away the dust and debris. Once the hole is drilled, you can insert a screw or anchor as needed. **

One way to remove small paint splatters from concrete is to use a pressure washer with a narrow nozzle to blast the paint off the surface. Another method is to use a wire brush or scraper to physically remove the paint. Additionally, applying a commercial paint remover or solvent to the splatters and then scrubbing with a stiff brush can also help to remove the paint from the concrete. It's important to test any method in a small, inconspicuous area first to ensure it doesn't damage the concrete. **